Industry information
News

Kobor - the method of casting machine tools

2010-12-20 Keboer Group 2884

Casting methods are commonly used for sand casting, followed by special casting methods such as metal casting, investment casting, gypsum casting, etc. Sand casting can be divided into clay sand type, organic binder sand type, resin self-hardening sand type, lost mold and the like.

Principles of casting method selection:

1 Sand casting is preferred, mainly because sand casting has lower cost, simple production process and shorter production cycle than other casting methods. When the wet type does not meet the requirements, consider using a clay sand table dry sand type, dry sand type or other sand type. Clay wet sand castings can weigh from a few kilograms up to tens of kilograms, while clay dry castings can weigh up to tens of tons.

2 The casting method should be compatible with the production batch. Casting methods such as low pressure casting, die casting, and centrifugal casting are only suitable for mass production because of the high cost of equipment and molds.

3 The modeling method should be suitable for factory conditions.

For example, it is also the production of castings such as large machine bed, generally using the core forming method, not making the pattern and the sand box, and assembling the core in the pit; while the other factory adopts the sand box modeling method to make the appearance. Different enterprise production conditions (including equipment, site, staff quality, etc.), production habits, and accumulated experience are different. It should be considered according to these conditions what products are suitable and what products are not suitable (or not).

4 To balance the accuracy requirements and costs of castings.

Scan me!

Sweep and read on the phone